How to Get Maritime Insurance: A Buyer's Guide

Written by the London Marine Insurance editorial team · reviewed by Anton Kuznetsov, founder

Getting maritime insurance right is not a form-filling exercise — it is a commercial decision that determines whether a total loss, a cargo claim or a collision liability is absorbed by your balance sheet or transferred to the market. This guide walks you through what cover you actually need, what underwriters will ask for, and how to move from enquiry to bound policy without leaving gaps that only become visible at claim time.

Understand What You Are Actually Buying

Maritime insurance is not a single product. It is a stack of interlocking covers, each responding to a different category of loss. A shipping company or fleet operator typically needs at least four layers: hull and machinery (H&M), protection and indemnity (P&I), marine cargo, and freight liability. A freight forwarder or cargo owner may only need cargo cover and freight liability, but the scope of each still matters enormously.

Hull and machinery cover responds to physical loss of or damage to your vessel, including machinery breakdown under the Inchmaree clause — which extends cover to latent defect, negligence of crew, and bursting of boilers. Without Inchmaree, a machinery failure caused by crew error is uninsured. The Institute Hull Clauses define the baseline, but your policy wording may extend or restrict that baseline, so the wording your broker negotiates matters as much as the premium.

Cargo cover is governed by the Institute Cargo Clauses. Clause A is the broadest, covering all risks of physical loss or damage subject to named exclusions. Clause B and Clause C cover progressively narrower perils — Clause C, for example, does not respond to washing overboard or entry of sea water. If your goods are moving in open-top containers or on deck, Clause A is the minimum you should accept. Your broker should be asking the underwriter whether on-deck stowage is noted and whether the policy responds on the same terms.

P&I cover sits outside the commercial insurance market for most large shipowners — it is mutual cover placed through a P&I Club. However, for smaller operators, fixed-premium P&I is available through specialist underwriters and covers third-party liabilities: collision liability (the running-down clause in your H&M policy typically covers only three-quarters of collision liability), cargo damage claims from third parties, crew injury under MLC 2006, and wreck removal. Understanding where your H&M policy ends and your P&I cover begins is critical — the gap between them is where uninsured liability lives.

What Underwriters Need Before They Can Quote

Underwriters price maritime risk on information, not assumptions. The more complete your submission, the more accurately the market can price your cover — and the less likely you are to face a coverage dispute later on the basis of non-disclosure. Under the Insurance Act 2015, your duty is to make a fair presentation of the risk, which means disclosing every material circumstance you know or ought to know. A material circumstance is anything that would influence a prudent underwriter's decision to accept the risk or set the premium.

For hull and machinery, you will need to provide the vessel's class certificate and class society, the trading area (including any war-risk zones such as areas listed under Joint War Committee guidance), the vessel's age and last survey date, the crew's certificates of competency, and your claims history for the past five years. If the vessel is trading out of class or has outstanding class conditions, disclose them — concealment is grounds for avoidance.

For cargo, underwriters need your annual cargo throughput or estimated shipment value, the commodity types and packaging, the trade routes, the mode of transport (containerised, bulk, breakbulk, refrigerated), and whether you are the shipper, consignee or freight forwarder. If you are a freight forwarder placing cover on behalf of clients, you need to be clear about whether you are insuring your own liability or your clients' goods — these are different products with different policy wordings.

  • Vessel particulars: name, IMO number, flag, class society, year of build, GRT/GT, type
  • Current class certificate and any outstanding recommendations or conditions
  • Trading area and any intended deviation into JWC-listed war-risk zones
  • Crew list with certificates of competency and MLC 2006 compliance documentation
  • Five-year claims history with brief descriptions of each claim
  • For cargo: commodity, packaging, annual shipment values, trade lanes, Incoterms
  • Existing policy schedule and expiry date if you are seeking a renewal or replacement

General Average, Sue-and-Labour and Why They Affect Your Cash Flow

Two clauses that owners and cargo interests consistently underestimate are general average and sue-and-labour. General average is a principle of maritime law — codified under the York-Antwerp Rules — that requires all parties with a financial interest in a voyage to contribute proportionally to a sacrifice made to save the common adventure. If a vessel jettisons cargo to refloat after grounding, every cargo owner on that vessel contributes to the loss, not just the owner of the jettisoned goods. Without cargo insurance that responds to general average contributions, you are funding that contribution from your own working capital while the adjustment — which can take years — is resolved.

Sue-and-labour is the obligation on the insured to take reasonable steps to avert or minimise a loss, and the corresponding right to recover those costs from underwriters even if the underlying loss is not covered. If your cargo is damaged in transit and you incur costs to salvage, repack and forward it, those costs are recoverable under the sue-and-labour clause provided you acted reasonably. This is not automatic — you need to document the steps taken and the costs incurred, and notify your broker promptly. Delayed notification is one of the most common reasons sue-and-labour claims are reduced or disputed.

The practical implication for fleet operators is that your hull policy's sue-and-labour provision means you should authorise emergency repairs and engage salvors without waiting for underwriter approval — but you must notify your broker immediately and keep records. Acting to save the vessel is your duty; failing to act because you were waiting for permission is not a defence.

Placing Cover Through a London-Market Specialist Broker

The London market — including the company market and specialist underwriters operating in the City — remains the deepest source of capacity for complex marine risks. For a UK or EEA operator, placing through a London-market specialist broker means your risk is presented to underwriters who understand Institute Clauses, who have claims-handling experience in the trades you operate, and who can negotiate manuscript endorsements where standard wordings do not fit your operation.

The placement process begins with a submission — the information set described above — which your broker presents to underwriters. For straightforward risks, a quotation can be returned within a few working days. For complex fleet risks, war-risk extensions, or unusual commodities, allow more time and expect underwriters to ask supplementary questions. Once terms are agreed, cover is bound on a slip or market reform contract (MRC), and the policy is issued. The MRC is the authoritative record of what is and is not covered — read it before you sign, not after a claim.

Renewal is not a passive event. Your broker should be reviewing your trading area, your fleet changes, your claims experience and any changes in the regulatory environment — including updates to JWC war-risk listed areas or changes to carriage convention exposure under Hague-Visby, Hamburg or Rotterdam Rules — before approaching the market. If your vessels have moved into higher-risk trading areas or your cargo mix has changed, your existing policy may not respond as you expect. Bring those changes to your broker before renewal, not after a loss.

Liability Exposure You May Not Have Priced In

Shipowners and operators face liability exposure that sits outside hull cover and is only partially addressed by standard P&I. The Convention on Limitation of Liability for Maritime Claims (LLMC) allows shipowners to limit their liability to a figure calculated by reference to the vessel's tonnage in Special Drawing Rights — but limitation is not automatic, it must be claimed, and it can be broken if the claimant proves the loss resulted from the owner's personal act or omission with intent to cause such loss, or recklessly. Your P&I cover should be structured to respond up to and including the cost of constituting a limitation fund.

Freight forwarders face a different liability profile. Your liability to cargo owners is governed by your trading conditions — typically BIFA Standard Trading Conditions in the UK — and by the carriage conventions applicable to the legs of the journey. A multimodal shipment touching sea, road and air legs may engage different liability limits on each leg. Freight liability insurance covers your exposure as a forwarder when goods are lost or damaged in your custody or under your contractual responsibility. It is not the same as cargo insurance on the goods themselves, and the two should not be confused.

Pollution liability is a growing exposure for vessel operators, particularly under the International Convention on Civil Liability for Bunker Oil Pollution Damage (Bunker Convention) and CLC for tankers. Compulsory insurance certificates are required for vessels over a certain tonnage calling at ports in contracting states. Your P&I cover should include pollution liability, and your broker should confirm that the certificate of entry or fixed-premium policy satisfies the flag state and port state requirements for every port in your trading pattern.

Frequently asked questions

Do I need separate war-risk cover, or is it included in my hull policy?
Standard Institute Hull Clauses exclude war, strikes, and related perils. War-risk cover is placed separately, typically on Institute War and Strikes Clauses (Hulls), and is subject to the Joint War Committee's current list of high-risk areas. If your vessel trades to or through a JWC-listed area — including parts of the Red Sea, Gulf of Aden and certain other regions — you need to notify your broker before the voyage, not after. Failure to notify can void the war-risk extension for that voyage.
What happens if my cargo is damaged and the carrier limits liability under Hague-Visby?
Under Hague-Visby Rules, a carrier's liability for cargo loss or damage is limited to a low per-package or per-kilo figure. For high-value goods, that limit will not come close to covering your loss. Your own cargo insurance under Institute Cargo Clauses A responds to the full insured value of the goods, regardless of what the carrier pays. This is why cargo owners should not rely on the carrier's liability as a substitute for their own cover — the two are not equivalent.
How long does it take to bind maritime cover?
For a straightforward cargo open cover or a single-vessel hull risk with a clean claims record, terms can typically be agreed and cover bound within two to five working days of a complete submission. Complex fleet risks, vessels trading in war-risk areas, or unusual commodities may take longer as underwriters ask supplementary questions. Do not leave placement to the week before your policy expires — if your renewal is contested or your risk profile has changed, you need time to negotiate properly.
What do you need from me to get a quote?
For hull and machinery: vessel name, IMO number, flag, class society, year of build, gross tonnage, trading area, crew certificates, and five years' claims history. For cargo: commodity description, packaging, annual shipment values, trade routes, and Incoterms. For P&I or freight liability: your trading conditions, fleet list, and a description of your operation. The more complete your submission, the faster and more accurately the market can respond.
Is a London-market policy valid for vessels flagged in EEA states?
Yes. London-market policies are placed under English law and are recognised across EEA jurisdictions. However, some flag states and port states require compulsory insurance certificates — for example, under the Bunker Convention or CLC — that must be issued by an approved insurer. Your broker should confirm that the underwriters on your policy are approved to issue the relevant certificates for your flag state and trading ports.
What is the difference between a voyage policy and an open cover?
A voyage policy covers a single, defined shipment from origin to destination. An open cover is a standing arrangement that automatically insures all qualifying shipments you declare within agreed parameters — commodity, trade lane, vessel type, maximum value per conveyance. For freight forwarders and regular shippers, an open cover is more efficient and ensures no shipment is accidentally left uninsured because a declaration was missed. Your broker should build the open cover around your actual shipping pattern, not a generic template.

If you are ready to place or review your maritime cover, send us your vessel particulars, trading area and current policy schedule. We will review your existing cover for gaps, prepare a submission for the specialist market, and come back to you with terms — not a call centre script.

Talk to a specialist

Tell us a few details about the operation and we'll come back with indicative terms within 24 hours.